Daysi Tragesser

Sassafrass Penobscot Paddle Replica 2

The last paddle project from back in the fall was a crudely cut Sassafras twin blank from making a replica of the  c.1900 Antique Penobscot Paddle. This particular blank was cut rather thin, resulting in a 1" shaft diameter. The opposite side of the blade also has a nasty looking knot but it shouldn't affect its use in the water.


Unlike the actual replica made with a flatter grip style to match the original, I played within the design confines of this blank and left the grip area much thicker. It has a distinct spine down the middle and is dihedral in shape with a more comfortable bulbous top grip. Sassafras has a lovely golden colour when oiled. Here is shot while the grain was wetted for the final sanding phases.



Instead of using paint on this one, I wanted to do more negative pyrography where the bulk of the wood is charred so that golden colour could be emphasized in the form of more double curve motifs. I had already started the work with my tiny woodburning pen instead of using the shou-sugi-ban technique recently learned about so this new decorative method will have to wait until for the next paddle in the works (likely this one here)

This time, I took inspiration for the second side of the c1849 Green Penobscot paddle at the Peabody Museum. Readers might recall that for a while, the only photo of this paddle an official catalog shot showcasing the white scroll design on a single side only. I've used this pattern twice now.



Thankfully, this paddle was chosen to be part of the ongoing exhibit The Legacy of Penobscot Canoes: A View from the River (through April 2016) where the other side was put on display. This second side of the paddle blade has a different, more complex double curve motif which was captured by some online friends and sent my way.



The blade shape on the original and my left-over blank are quite different, but I set to work, free handing some double curves inspired by this new pattern. The blurry picture below shows what I came up with before the burning process started.


A nice weekend of bourbon drinking and pyrography and this is the result so far. Still some touch-up needed here and there and some oiling, but with some lovely snowfall finally happening this winter, I took some photos outside.